JAPAN’S INDUSTRY. YOUR PERSPECTIVE.
JAPAN MANUFACTURINGINSIGHTINDIA EDITION
OUR PARTNERS · SPONSORED PROFILE
Forging Screw Press — SERVO-DRIVEN SCREW PRESSES
PARTNER

Forging Screw Press

READ MORE ↗
Business & Markets

Rare-Earth Procurement Costs Up 22% in a Year, Survey Finds: The Timing Problem in Japan's Shift Away from China

Rare-earth procurement is getting more expensive and harder for Japanese manufacturers. In a survey published in July 2026 by Resilire, a supply-chain risk-management firm, respondents reported that their procurement costs for rare earths and related materials or parts had risen…

Rare-Earth Procurement Costs Up 22% in a Year, Survey Finds: The Timing Problem in Japan's Shift Away from China

Rare-earth procurement is getting more expensive and harder for Japanese manufacturers. In a survey published in July 2026 by Resilire, a supply-chain risk-management firm, respondents reported that their procurement costs for rare earths and related materials or parts had risen by an average of 22.3% over the past year, and more than nine in ten said they were struggling to obtain at least one item.

A leading factor is China's tightening of exports to Japan. Just how much of the increase the export controls account for cannot be separated from market prices, exchange rates and processing costs. Even so, the price rises and shortages look unlikely to be a passing blip. The question is over what horizon — short, medium or long term — the moves towards reducing dependence on China, from low-rare-earth technologies to recycling and diversified sourcing, can catch up with the squeeze.

Rare earths are used in the high-performance magnets found in motors and generators, as well as in polishing materials and catalysts. Neodymium magnets in particular are built into products at the core of decarbonisation and automation — traction motors for electric vehicles, industrial robots, wind turbines. A disruption in their supply reaches across a wide swathe of manufacturing.

Key points

  • In Resilire's survey (conducted in June 2026 among 400 decision-makers who procure rare earths or related materials and parts at manufacturers), respondents reported an average 22.3% rise in procurement costs over the past year
  • More than nine in ten respondents faced difficulty obtaining at least one material; the reported average procurement-fulfilment rate was just under 70%, and about one in ten said they could not pass on any of the increase
  • Citing worsening Japan-China relations, China has restricted exports to Japan centred on heavy rare earths such as dysprosium and terbium; shipments of the two to Japan have been effectively halted since January 2026
  • Japanese responses span low-rare-earth magnets, rare-earth-free motors, magnet recycling, diversified sourcing, domestic refining and national stockpiles — but none offers a quick fix
  • The question is which responses can reach volume production and viable economics in time, on the assumption that higher costs and supply constraints persist

What the survey shows

The survey put numbers to the pressure that procurement teams are feeling — in the form of self-reported figures from responding companies.

Resilire conducted the online survey in June 2026 among 400 decision-makers who procure rare earths and related materials or parts at manufacturers. Respondents reported an average 22.3% rise in their procurement costs over the past year. More than nine in ten said they had difficulty obtaining at least one material, and the reported procurement-fulfilment rate — how much of the required volume they can secure — averaged just under 70%. These are self-reported figures from procurement staff, and do not necessarily represent the price rise of rare earths alone.

How far companies can pass the increase on to product prices varies widely among respondents. About one in ten said they could not pass on any of it — leaving some firms to absorb the higher costs directly, with a corresponding squeeze on margins.

Why costs are rising

A leading factor behind the price rise appears to be China's export controls on shipments to Japan.

China has progressively tightened export controls on a range of items, including rare earths, in recent years. In January 2026, its controls on shipments to Japan were tightened further and took effect the same day. The heaviest impact falls on heavy rare earths such as dysprosium and terbium — elements added to neodymium magnets so that they retain their magnetic force at high temperatures, and therefore essential for uses such as traction motors that generate a lot of heat.

Shipments of these heavy rare earths to Japan have been effectively halted since January 2026. China holds an overwhelming share of the world's rare-earth supply, particularly in separation and refining, and Japan's procurement has long leaned heavily on it. As that supply thins, buyers must fall back on relatively expensive non-Chinese material, pushing procurement prices up.

Trading houses and others are responding by developing suppliers outside China, but non-Chinese output is limited in volume and higher in price. Some are adjusting how they allocate orders, giving priority supply to customers who accept the price increases. In other words, this cost rise is less a temporary imbalance of supply and demand than the surfacing of the cost of moving procurement away from China itself.

Two risks on the factory floor

Procurement teams face two risks: price and volume.

The first is cost. If they cannot pass it on, profits shrink; if they do, the competitiveness of the final product suffers. That about one in ten cannot pass on any of the increase points to firms with weaker pricing power absorbing it themselves — though the survey does not break results down by company size, so the extent of that concentration is not clear from these figures alone.

The second is securing volume. The reported fulfilment rate averaged just under 70%. The distribution of responses is not given, so it is not clear whether shortages are broad or whether severe shortfalls at a few firms are dragging the average down. Either way, since a single missing magnet leaves a product unfinished, procurement difficulty ultimately raises the risk of reduced output or halted production. In the past, worries over rare-earth-magnet supply have affected car production.

Which bites first, cost or volume, differs by industry — but both point the same way: the premise of procurement, securing the required volume at a workable price when it is needed, is starting to erode.

Moves to reduce dependence on China

Against this pressure, Japanese players are responding on several fronts. Most, however, take time to bear fruit — and they are at different stages of maturity.

The first is reducing rare earths in the magnets themselves. Neodymium-magnet makers such as Proterial, Shin-Etsu Chemical, TDK and Daido Steel have worked to cut the amount of expensive, supply-risky dysprosium and terbium while preserving heat resistance. The less heavy rare earth a magnet needs, the less exposed it is to the controls.

The second is on the motor side. Toyota, Hitachi and others have been developing motors that do not rely on neodymium magnets, or that greatly reduce rare-earth use — making up for performance through motor structure and control rather than magnet strength.

The third is recycling. Efforts are advancing to recover rare earths from used motors and magnets for reuse. The cost and quality of recovery and separation remain challenges, but keeping the loop domestic would lower import dependence itself.

The fourth is diversified sourcing and domestic refining. Cooperation with producers outside China — in Australia, Vietnam and India — is being explored, and at home Shin-Etsu Chemical has moved into rare-earth refining. National stockpiling by the Japan Oil, Gas and Metals National Corporation (JOGMEC) also serves as insurance against a supply cut-off.

All of these matter from an economic-security standpoint, but their maturity differs. Some low-rare-earth magnets are close to volume production, while rare-earth-free motors and recycling are still in research, demonstration or capacity build-out — so how much of the shortfall they can fill is limited. Redesigning a magnet requires time for performance validation and production ramp-up, and non-Chinese refining faces significant cost and scale constraints.

For now, then, the near term will be bridged with short-term measures: building inventory, securing supply through long-term contracts, allocating limited material across uses, and drawing on national stockpiles. These buy time rather than solving the problem at its root. The challenge is getting through the transition until the structural responses take effect.

What to watch next

The survey suggests that higher costs and supply constraints are not a passing market swing but are moving towards a structural change. Three things are worth watching from here.

First, which layer the cost increase settles on. Smaller parts makers with weaker ability to pass costs on are more exposed, and profitability may give way at the weakest points of the supply chain.

Second, which responses reach volume production and viable economics in time. There is a distance between a laboratory result and a mass-produced part that meets cost and reliability targets for low-rare-earth magnets and rare-earth-free motors. How far the technology matures — and how far the product-side design changes needed to adopt it progress — is the question.

Third, the course of China's export controls and Japan-China relations. If the controls are prolonged or tightened, the investment in reducing China dependence will need to be brought forward further. Even if they ease, a supply chain that has begun to disperse will not necessarily snap back.

Rare earths support Japan's growth areas in manufacturing — decarbonisation and automation — right at the materials entry point. How far their procurement can be stabilised, on both cost and volume, will shape competitiveness in those fields — an issue that manufacturers elsewhere in Asia, including in India, exposed to the same Chinese supply, have reason to watch too.

OUR PARTNERS

JAPANESE INDUSTRY, CONNECTED.
VIEW ALL PARTNERS ↗