NS TOOL CO.,LTD.
NS TOOL is a Japanese end mill manufacturer specializing in small-diameter and offers over 10,000 models and sizes of standard items. The diverse product lineups are highly rated. MUGEN COATING series are widely used in cutting applications and MUGEN COATING PREMIUM series are…


Company Introduction — NS TOOL
NS TOOL is a Japanese end mill manufacturer specializing in small-diameter and offers over 10,000 models and sizes of standard items. The diverse product lineups are highly rated. MUGEN COATING series are widely used in cutting applications and MUGEN COATING PREMIUM series are suitable for direct-milling of high-hardened steel. To meet severe requirements, we have developed CBN end mill series having superior hardness and achieved mass production and standardization. These achieve much longer tool life compared to carbide products. To customers seeking for mirror finishing, PCD end mill (polycrystalline diamond) series are available to achieve a nanometer-level surface roughness. Our new coating "MUGEN COATING PREMIUM Plus" maintains outstanding tool life and precision machining even on high-hardened steel (up to 70HRC). We proudly introduce two models with this new coating: MRBSH230SF, 2-flute for high-precision machining, and MRBSH330, 3-flute for high-efficiency machining.
MUGEN COATING PREMIUM Plus — MRBSH230SF

Realizes stable cutting performance even for 70 HRC hardened steel. New optimized tool material and design to reduce cutting load. Tool size: R0.05 〜 R3, total 115 sizes with various under neck length.
R ±0.003 mm
R accuracy is based on a half value of actual diameter


High accurate R
MRBSH230SF features newly developed MUGEN COATING PREMIUM Plus with high oxidation and abrasion resistance. A seamless design on rake and flank face from R-curve to peripheral cutting edge enables very high machining accuracy.
In the following example of high-hardened steel (68HRC) machining, even after 2 hour 29 minutes of finishing with tool size R0.5 x 4, deflection and surface roughness of work piece remained very good. This demonstrates that high-precision machining can be achieved even on high-hardened steel.
Cutting Conditions:
Item | Detail |
|---|---|
Tool | MRBSH230SF R1×4 / R0.5×4 |
Material | HAP72 (68HRC) |
Cutting Condition | S18,000 min⁻¹, F400 mm/min |
Stock | 0.01mm / pf 0.02mm |
Time | 8hr 25min |
Coolant | Oil mist |
Size | 20×35 mm (Depth 5.1mm) |

Results:
Initial stage of processing | Final stage of processing | |||
|---|---|---|---|---|
A Target | B Surface roughness | C Target | D Surface roughness | |
Target | 5.08mm | — | 5.08mm | — |
Actual | 5.087mm | Ra 0.114μm / Rz 0.963μm | 5.090mm | Ra 0.142μm / Rz 0.877μm |
Defection amount | Below 0.001mm | — | 0.001mm | — |
By Nikon MM-20 / KEYENCE VK-X250
MUGEN COATING PREMIUM Plus — MRBSH330

High-efficient 3-flute ball end mill optimized central cutting edge enables high depth of cutting. Even hardened steel 60 to 70 HRC can be machined with long tool life and high efficiency. High accuracy type, shank diameter tolerance -0.001mm 〜 -0.003mm.
MRBSH330 features chip pocket design ① balanced tool rigidity and smooth chip removal at the center ball shape. Design ② can reduce cutting load to enable high depth of cut. Furthermore, unequal flute spacing (α ≠ β ≠ γ) effectively suppresses chattering, even under the high feed conditions. Combined with the newly developed MUGEN COATING PREMIUM Plus, extends tool life and enables long-term, highly efficient machining, even in small-diameter machining.
As shown in second example below, even when slotting on high-speed steel HAP72 with hardness up to 70HRC, machining accuracy is maintained within 2 μm and achieving high-precision performance.

Cutting Conditions:
Item | Detail |
|---|---|
Tool | MRBSH330 R0.15×0.5 / R0.2×0.5 / R0.3×1 |
Material | HAP72 (70HRC) |
Time | 8min 20sec |
Coolant | Oil mist |
Cutting area | 10×10 mm (2 shapes) |

Process Results:
Process (Shape) | Slot (∞) | Slot (Plus · ≦) | Slot (70HRC) |
|---|---|---|---|
Tool | R0.3×1 | R0.15×0.5 | R0.2×0.5 |
Spindle speed | 25,000 min⁻¹ | 32,000 min⁻¹ | 32,000 min⁻¹ |
Feed | 400 mm/min | 250 mm/min | 400 mm/min |
Depth of cut | ap 0.01mm | ap 0.003mm | ap 0.006mm |
Depth | 0.35mm | 0.06mm | 0.06mm |
Cutting time | 2min | 3min 30sec | 2min 50sec |
Slot Depth Results:
Work shape | ∞ slot depth | Plus slot depth | ≦ slot depth | 70 slot depth | HRC slot depth |
|---|---|---|---|---|---|
Target | 0.350mm | 0.060mm | 0.060mm | 0.060mm | 0.060mm |
Actual | 0.349mm | 0.059mm | 0.059mm | 0.059mm | 0.058mm |
By KEYENCE Laser Microscope VK-X3000
We are providing highly stable and precision end mills and always seeking comprehensive machining technologies on the customers' standpoints in the precision machining. A wide range of services are provided from tool manufacturing to machining technology support tailored for customers' needs. Please contact us for further information.







